Tutorial Tweak PC

Still wait until Windows asks you if you want to restart the PC. * Accept to restart it and after the reboot everthing should be ready. Under “IDE ATA/ATAPI controllers” you should now see your AHCI controller ready. ...

AHCI stands for Advanced Host Controller Interface. One of the main reasons for switching to AHCI-mode is to take advantage of the NCQ-Feature of your SATA harddrive. NCQ (Native Command Queuing) allows ATA drives to accept more than ...

Intel ICH7R/M, ICH8R/M, ICH9R/M or ICH10R/D S-ATA AHCI and RAID Controllers -IDE Mode -AHCI Mode -RAID Mode NVIDIA nForce RAID or AHCI - updated: "NF4-5 non-AHCI WHQL Packs" (32/64bit) - updated: "Special WHQL Performance Packs" ...

So, following Big's post, after trying everything, it was suggested to turn of AHCI in the bios and go ATA. This worked first try and I backed up 3 disks immediately without one single error and the Plextor drive I was reading with ...

There were two, whose approximate names (retranslated from what I remember from their names in Spanish) were "iSCSI Microsoft AHCI launcher" (under Storage Controllers) and "Standard Serial ATA Controller" (under ATA/ATAPI IDE ...

Microsoft Windows Installer 3.1 v2 Remote Desktop Protocol 6.1 Windows Card Space Supported Drivers Included -Intel ICH7R/M, ICH8R/M, ICH9R/M or ICH10R/D S-ATA AHCI and RAID Controllers -IDE Mode -AHCI Mode -RAID Mode -NVIDIA n RAID or ...

When I later set the BIOS to AHCI mode, the BIOS hangs at: Serial ATA AHCI BIOS, Version iSrc 1.20E Copyright (c) 2003-2008 Intel Corporation 23 ** This version supports only Hard Disk and CDROM drives ** Please wait. This will take few seconds. ... Reset the CMOS and back to IDE mode just fine but I do not really want to have to reinstall the O.S to get AHCI working. Other brand motherboards and windows 7 cope with the IDE/AHCI change just fine. ...

Stop 0×000000ED (UNMOUNTABLE_BOOT_VOLUME)
Stop 0×0000007B (INACCESSIBLE_BOOT_DEVICE)
These two errors have similar causes and the same troubleshooting steps apply to both of them. These stop codes always occur during the startup process. When you encounter one of these stop codes, the following has happened:

really easy. but this only works if the original motherboard and harddrive still work. so put it back together.

if you changed the theme on your PC to a more classic view but now want to re-enable the Aero theme turned back on, do the follow the steps.

that have 802.11n wireless cards built in, per default 802.11n mode is enabled and they will try to connect to any 802.11n networks that maybe in range.

Follow the steps below to reinstall an optical drive:
-Click on Start and then Control Panel.
-Click on the button in the upper left hand corner labeled “Switch to Classic View”
-Double Click on System
-In System, click on the Hardware Tab.
-In the Hardware Tab, click on Device Manager.
-In the Device Manager, double click on “DVD/CD-ROM Drives”
-Double click on [...]

When the computer starts, the computer stops responding (hangs) and an error message appears. The error message reads Loading PBR for Descriptor x … Done (where x represents a number 1,2 or 4).

This code means the system tried to access a nonexistent piece of memory, mostly because of:
- A driver trying to access a page of memory that is not present
-A system service (ex. virus scanner) failing in an exceptional way
- Faulty or incorrectly seated memory
- Corrupted data on the hard drive

This stop code indicates the NTFS file system driver encountered a situation it could not handle, and is almost always caused by 3 things:
- Data corruption on the disk
- Data corruption in memory
- The system completely running out of memory (this typically only happens on heavily-loaded servers)

To install drivers for a monitor in Microsoft Windows XP:

Go to the Control Panel by clicking the Start button then Control Panel.

I would like to install Vista 64 bit OS on my HDD, but OS installation is unable to complete successfully. I am able to boot up from my SATA ODD. My memory module is listed on your QVL. The total amount of memory is 4G. I have checked the connections, and everything is connected well. [...]